The Surface Of Blade Body Is Treated By Abrasion Material, Not Easily Scratched.
Four Ultra-High Rebound Coefficient Of The Fiber Mat (International Initiative)
Cleaving Type: Single Quartz Fiber
Applicable Coating Diameter: 0.25 Mm ~ 0.9 Mm
Applicable Cladding Diameter: 125um
Cleave Fiber Length: 9~16(0.25),
Cleave Angle: 0.5°
Blade Life: 16 Surface × 2000 Times / Face = 32000 Times (Each Face Directly Cleave 2000 Times,
Saving The Trouble Of Adjusting Blade Height).
Measurement: 56(W)×55(L)×48(H)
Weight: 265g
Four Ultra-High Rebound Coefficient Of The Fiber Mat (International Initiative)
Cleaving Type: Single Quartz Fiber
Applicable Coating Diameter: 0.25 Mm ~ 0.9 Mm
Applicable Cladding Diameter: 125um
Cleave Fiber Length: 9~16(0.25),
Cleave Angle: 0.5°
Blade Life: 16 Surface × 2000 Times / Face = 32000 Times (Each Face Directly Cleave 2000 Times,
Saving The Trouble Of Adjusting Blade Height).
Measurement: 56(W)×55(L)×48(H)
Weight: 265g
| User Guide |
| 1.Open The Rear Switch Of Cleaver, The Upper Part Of The Cleaver Will Bounce Automatically 2.Push The Protruding Rear Part Of The Cleaver, So The Blade Slide To Front Side 3.Put The Holder Which Has Held The Fiber To The Blade Groove 4.Press And Hold The Holder, While Press The Upper Part Of Cleaver, Push The Front Half Of The Protruding Part 5.Take Out The Holder Note: 1.Be Sure To Put The Holder In The Groove Correctly 2.While Holding The Upper Part Of The Blade For Cleaving, Pressing To Ensure A Smooth, Flat Vertical Face To Ensure Cleaver 3.Within A Certain Number Of Times For The Same End Face Cleaving Blade, Please Must Timely Handover The Blade, To Ensure The Cleaving Quality |